Recommended Reading for the Additive Manufacturing Certification Gibson, Ian, Rosen, David, and Strucker, Brent. Additive Manufacturing Technologies: 3D Printing, Rapid Prototyping, and Direct Digital Manufacturing*, Second Edition. Springer, 2015. ISBN 978-149 392 1126. *Please note: this book can be purchased at Amazon.com. Websites referenced Carnegie Mellon University. 3D Printing Safety. Fuges, Christina M. “Changing the Rules.” Additive Manufacturing, October 23, 2015. Graves, Andrew. “Using Photopolymers for Your 3D Printing Projects.” Industry Week, July 28, 2016. Hendrixson, Stephanie. “Safety Tips for Metal AM.” Additive Manufacturing, March 23, 2016. Moylan, Shawn, Slotwinski, John, et al. Lessons Learned in Establishing the NIST Metal Additive Manufacturing Laboratory. NIST Technical Note 1801. National Institute of Standards and Technology. U.S. Department of Commerce, June 2013. Occupational Safety and Health Administration, U.S. Department of Labor. Focus 4 Construction Safety & Health: Electrical Safety Participant Guide. Occupational Safety and Health Administration, U.S. Department of Labor. “Hazard Communication Standard: Labels and Pictograms.” OSHA Brief, DSG BR-3636, February 2013. Occupational Safety and Health Administration, U.S. Department of Labor. “Hazard Communication Safety Data Sheets.” OSHA QuickCard, 3493-12R, 2013. Occupational Safety and Health Administration, U.S. Department of Labor. “General Environmental Controls: The Control of Hazardous Energy (Lockout/Tagout).” Occupational Safety and Health Standards – 29 CFR 1910.147. Sentry Air Systems, Inc. “Heating Plastic Filament for 3D Printing Presents Respiratory Hazards from Air-borne Chemicals and Ultrafine Particles.” 2016. Stephens, Brent, Azimi, Parham, et al. “Ultrafine Particle Emissions from Desktop 3D Printers.” Atmospheric Environment, Volume 79, November 2013. Thomas, Douglas S., and Gilbert, Stanley W. Costs and Effectiveness of Additive Manufacturing: A Literature Review and Discussion. NIST Special Publication 1176. National Institute of Standards and Technology, 2014.